Flame Photometer

Microcontroller Based Flame Photometer

4.8 / 5 · 37 verified reviews

Model : µFlameCal10 | Make : ANALAB | HSN Code : 90275010

Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Share:
Element Range
Na, K, & Li : 1-100 ppm, Ca : 15-100, Ba : 50-1000 ppm ppm
Sensitivity
Na : 0.5 ppm, K : 0.5 ppm, Li : 0.5ppm, Ca : 15 ppm, Ba : 50 ppm
Filter Selection
Automatic by soft touch key
Resolution
0.1 ppm
Detector
Silicon Photodiode
Linearity
Better than 2%
Unit of Measurement
ppm
Reproducibility
Curve Fitting Accuracy
Quick Calibration Facility
With highest standard
Dilution Factor
Yes, by soft touch keypad
Calibration
Upto 03 standards per Elements with Curve Fitting Software in-built with Instrument. (Automatic calculation of curve coefficient)
Ignition System
Automatic
Flame Type
LPG & Dry Oil Free Air
Auto Flame ON / OFF Detection
Audio and Visual Alarm
Gas Control
Adjustable with regulator
Atomizer
Axial Flow Type
Air Flow Monitoring Facility
4 – 6 ml/min., In-built with Instrument
Error Messages
“Home Detection”, “Memory Full”, “Flame is Off”, “Value Out of Limit”, “Do Warm-up”, “In Correct Standard” & “Enter in Range”.
Display
16 x 2 Line Alphanumeric LCD with Backlit
Keypad
Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
Air Supply Unit (Separate Unit)
Consist of Air Compressor, Pressure Gauge, Pressure Regulator, Moisture Filter, PU Tube (2 Meters) and Air filter with moisture absorbent catalyst.
Calibration Data Storage
Non-Volatile Memory which can store, last calibration data for all elements.
Analysis Data Storage : More than 500 analysis data which can be viewed & Print, company name, analysis date & time, record number, *Username, *Sample Name, *Bath Number/ID, Calibration data of lower & higher standard, result, Dilution factor, instrument serial number, Instrument Make & Model & *Signature etc. Secondly, analysis data can be print online without saving analysis data in Instrument.
(*: Not possible to enter data by instrument keypad but it will be handwritten)
Searching of data
With record number by scrolling.
Report Formation
As per Non-GLP Compliance
Printer Interface
Centronics Parallel Port / Serial (RS-232 C) Port
Printer
40 / 80 Column Dot Matrix Printer (Printer must procure optionally)
Power Supply
230VAC ± 10%, 50 Hz
Dimensions:
● Net Dimension: 37 x 29 x 34 cm (L x W x H)
● Gross Dimension: 48 x 43 x 42 cm (L x W x H)
Weight:
● Net Weight: 8.5 kg
● Gross Weight: 14 kg
Download brochure

Testimonial video ready for playback.

Customer Testimonial
Analab Scientific Instruments