- Element Range
- Na, K, & Li : 1-200 ppm, Ca : 15-300 ppm, Ba : 30-3000 ppm
- Sensitivity
- Na : 0.5 ppm, K : 0.5 ppm, Li : 0.5 ppm, Ca : 15 ppm, Ba : 50 ppm
- Filter Selection
- Automatic by soft touch key
- Resolution
- 0.1 ppm
- Detector
- Silicon Photodiode
- Linearity
- Better than 2%
- Unit of Measurement
- ppm
- Calculation of Concentration
- In built with system & can be measure by Sample Weight & Dilution Factor.
- Reproducibility
- Stability
- Curve Fitting Accuracy
- Correlation Factor
- Possible with System
- Quick Calibration Facility
- With Highest standard
- Calibration
- Upto 05 standards per Elements with Curve Fitting Software in-built with Instrument. (Automatic calculation of curve coefficient)
- Measurement of Sample
- Multi elements in single aspiration OR one by one.
- Ignition System
- Auto Igniter
- Flame Type
- LPG & Dry Oil Free Air
- Auto LPG Shut-off at Power Off
- Safety feature in case of sudden power failure.
- Auto Flame ON / OFF Detection
- Audio and Visual Alarm
- Gas Control
- Adjustable with Regulator
- Atomizer
- Axial Flow Type
- Air Flow Monitoring Facility
- 4 – 6 ml/min., In-built with Instrument
- Error Messages
- “LPG is Offâ€, “Home Detectionâ€, “Memory Fullâ€, “Flame is Offâ€, “Value Out of Limitâ€, “Do Warm-upâ€, “In Correct Standard†& “Enter in Rangeâ€.
- Display
- 20 x 4 Line Alphanumeric LCD with Backlit
- Keypad
- Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
- Air Supply Unit (Separate Unit)
- Consist of Air Compressor, Pressure Gauge, Pressure Regulator, Moisture Filter, PU Tube (2 Meters) and Air filter with moisture absorbent catalyst .
- Calibration Data Storage
- Non-Volatile Memory which can store, print & view report date & time, company name, calibration date & time, calibration done by, standards results, calibration done on, instrument serial number, instrument ID etc.
- Analysis Data Storage
- More than 750 analysis data can be stored with corresponding calibration data, analysis date & time, record number, Batch number / ID, sample name, username, assigned method number, Corresponding Calibration data of lower & higher standard, Sample Result, Dilution factor, Sample Weight, Calculation of Concentration, instrument ID, serial number, model number, make, etc. Secondly, analysis data can be print online without saving in Instrument.
- Searching of data
- With record number, batch number, date, date range and by scrolling.
- Report Formation
- As per GLP Compliance
- Password Protection
- Date & time, calibration mode & delete stored analysis data.
- Printer Interface
- Centronics Parallel Port / Serial (RS-232 C) Port
- Printer
- 40 / 80 Column Dot Matrix Printer (Printer to be procure optionally)
- Power Supply
- 230 VAC ± 10%, 50 Hz
- Dimensions:
â— Net Dimension: 37 x 29 x 34 cm (L x W x H)
â— Gross Dimension: 48 x 43 x 42 cm (L x W x H)
- Weight:
â— Net Weight: 8.5 kg
â— Gross Weight: 14Â kg
Download brochure