Model µMultiCal100 Make ANALAB HSN 90278990
µMultiCal100
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Hover to zoom · click to enlarge
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Multiparameter Analyzer (pH/ORP/Conductivity / TDS/Resistivity / Salinity/°C)

Multiparameter Analyzer with 21 CFR Part-11 Compliance
(pH/ORP/mV/Conductivity/TDS/Resistivity/Salinity/°C Analyzer)

Model : µMultiCal100 | Make : ANALAB |
HSN Code : 90278990

Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, ANALABsafe software, USB Interface Cable, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Model No.µMultiCal100
MakeANALAB
HSN Code90278990
Download Brochure Installation & Setup Guide
Download Report PDF
Share:
pH Range
-2.000 to 20.000 pH
Selectable Resolution
0.1 / 0.01 / 0.001 pH
Relative Accuracy
±0.02 / 0.002 pH
mV/ORP Range – mV/RmV
±2000.0
ORP
EH auto calibration to standard hydrogen electrode
Resolution
0.1
Relative Accuracy
±0.2 mV or 0.05%, whichever is greater.
Selectable Slope :
1) 80-120 %
2) 90-110 %
3) Customized slope (User adjustable)
Auto Buffer Recognition :
1) 4.01, 6.86 / 7.00, 9.18 / 10.01 pH @ 25ºC for three points (User adjustable)
2) 1.68, 4.01, 6.86 / 7.00, 9.18 / 10.01 & 12.45 pH @ 25ºC for five points (User adjustable)
3) Ten pH Buffer, 6.86 / 7.00 @ 25ºC for Multipoint Calibration.
Calibration Reminder Alarm
0-99 hours
pH Result
Auto / Manual
pH Buffer Standard
US / NIST / EURO / DIN
Short Link
Provided to diagnose the problem either with Instrument OR Electrode.
Conductivity Range :
● 0-20.00, 20-200.0, 200-2000 µS/cm, 2-20.000, 20-200, 200-2000 mS/cm for K=1.0
● 0-10.00, 10-100.0, 100-1000 µS/cm, 1-10.000, 10-100, 100-1000 mS/cm for K=0.5
● 0-2.00, 2-20.0, 20-200, 200-2000 µS/cm, 2-20, 20-200 mS/cm for K=0.1
(Range value change depending upon cell selection)
Conductivity Resolution
0.001, 0.01, 0.1 µS/cm & 0.001, 0.01, 0.1, 1 mS/cm
TDS Range : 0 to 10, 100, 1000, 10000 ppm, 100ppt, 1000ppt
(Depending on TDS Factor)
TDS Resolution
0.001, 0.01, 0.1 ppm & 0.001, 0.01, 0.1 ppt (1ppt=1000ppm)
Resistivity Range
20.00 MΩ to 50.00 KΩ, 5.00 KΩ, 500.00 Ω, 50.00 Ω, 0.50 Ω
Resistivity Resolution
0.001
Salinity
0.01 to 80000.0 ppm NaCl
Number of Range
Six
Calibration Standard
Six Conductivity & TDS Standard - One Per Range
Calibration Factor
Six – One Per Range
Range Selection
Auto / Manual
Suitable Cell Constant
0.1, 0.5 & 1.0 K
Adjustable Cell Constant
0.09 to 0.11 K, 0.45 to 0.55 K & 0.90 to 1.1 K
Conductivity to TDS Conversion
0.40000 to 1.00000 (Adjustable Factor)
Temperature Coefficient
Six - 0-10.000 % per °C (Adjustable) – One Per Range
Reading
Conductivity at actual temperature and at 25°C, TDS, Resistivity & Salinity with scrolling display.
Temperature Range
-5.0 to 130.0°C
Temperature Resolution
0.1°C
Temperature Compensation
Auto / Manual
Temperature Calibration
In-built software and can be calibrated by users
Calibration & Analysis
pH Mode, ORP Mode, Conductivity Mode and TDS Mode.
Error Message
“Wrong standard / Cell”, “Cell Short”, “Cell Open”, “Try Upper Range”, “Try Lower Range”, “Bad Buffer / Electrode”, “pH Over Range”, “Temperature Probe Error”, “In-complete Calibration”, “Calibration Due”, & “Low Memory”.
Display
20 x 4 Line Alphanumeric Backlit LCD.
Keypad
Membrane waterproof polyester soft keypad compliance to UL/ROHS.
Calibration Data Storage
Non-Volatile Memory can store, print & view calibration details.
Analysis Data Storage
More than 1000 analysis data can be stored with corresponding calibration data, company name, analysis data, sample name, sample batch/ID, username etc. Secondly, analysis data can be print online.
Searching of data
With record number, batch number, date, date range and by scrolling.
Report Formation
As per GLP Compliance.
21 CFR Part-11 Compliance :
● In-built with system for ease of operation without PC.
● 2 Admin, 10 Reviewers, 40 Users & 1 Manufacturer with individual Login ID & Passcode.
● Audit trail can store more than 5000 lines in instrument.
● Audit trail includes action taken, date & time, action taken by whom.
● Audit trail can be transfer to PC through ANALABsafe software and can print on 40 / 80 column dot matrix printer for record.
● Admins can set up operation permission of each Users & Reviewers.
● Strict Admins control to audit and monitor usage and access.
● Audit trail record can be printed with Date, Date Range and by individual User’s ID.
● Once Audit trail transfer to the PC or Printer, system will delete Audit trail records and before final deletion, the system will give warning twice.
● Data integrity with database capability to store Analysis Data, Calibration Data, Audit trail and Passcode in instrument.
● No direct access to data from outside the instrument, thereby creating a closed system.
● Audit traceability to ensure that the device and results are appropriately handled.
● Auto User’s logout after defined Logout time.
● Auto Users & Reviewers block when password is entered incorrectly 3 consecutive times.
Printer Interface
Centronics Parallel Port / Serial (RS-232 C) Port
Printer
40 / 80 Column Dot Matrix Printer (Printer to be procure optionally)
PC Interface
USB Type - B
PC Connectivity
By USB Interface Cable with Driver, ANALABsafe software to transfer Analysis data in GLP format, Calibration data and Audit trail from Instrument to PC in non-editable format (Cannot be Deleted)
Power Supply
DC Adaptor
Dimensions:
● Net Dimension: 22 x 21 x 11 cm (L x W x H)
● Gross Dimension: 32 x 29 x 23 cm (L x W x H)
Weight:
● Net Weight: 1.5 kg
● Gross Weight: 3.5 kg
Download brochure

Testimonial video ready for playback.

Customer Testimonial
Analab Scientific Instruments