- Temperature Controller
- Microcontroller Based
- Heating Media
- By Silicon Oil
- Temperature Range
- +5°C above ambient to 300ºC
- Readability
- 0.1°C
- Temperature Accuracy
- ±0.5°C
- Overheating Protection
- In-built - Set by user in method parameter.
- Heating Before EMP* : Automatic heating depending upon temperature difference
(* EMP: Expected Melting Point)
- Heating Rate
- 0.2, 0.5, 1.0, 2.0 & 5.0 ºC/min - Selectable after Set Point (EMP)
- Temperature Heating
- Automatic depending upon heating requirement.
- Temperature Calibration
- On-site with calibrated thermometer OR temperature indicator OR Pharmacopeia Standard.
- Magnetic Stirrer
- Built-in with soft touch Key speed controller
- Melting Capillary Port
- Three
- Boiling Tube
- One
- Calibration
- Six Calibration Standards (As per Pharmacopeia AND /OR Customer's known standards)
- Method
- 10 analysis method & 1 for Unknown sample with View, Print & Delete facility
- Temperature Sensor
- Simplex PT-100
- Glass Melting Capillary
- OD: 1.4 to 1.6mm | ID: 1.0mm | Length: 100mm | One End Sealed
- Sample Filling Height
- 3mm
- Viewing of Melting Capillary
- 10x Magnifying Glass
- Display of Melting Range
- Simultaneous MP1 (On set temperature) & MP2 (Clear temperature)
- Display
- 20 x 4 Line Alphanumeric Backlit LCD
- Keypad
- Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
- Calibration Data Storage
- Non-Volatile Memory which can store, print & view calibration date & time, company name, standard name with temperature, actual reading of standard temperature, observed temperature, calibration done by, instrument serial number/ID, model number etc.
- Analysis Data Storage
- More than 500 analysis data can be stored with corresponding calibration data, analysis date & time, record number, Batch number / ID, sample name, username, assigned method number, MP1 (On set temperature) & MP2 (Clear temperature) reading of all three reading, instrument ID, serial number, model number, make, etc. Secondly, analysis data can be print online without saving in Instrument.
- Password Protection
- Date & Time, Calibration Mode, Delete Stored Analysis Data and Restore Factory Set Calibration Data
- Printer Interface
- Centronics Parallel Port / Serial (RS-232 C) Port
- Printer
- 40 / 80 Column Dot Matrix Printer (Printer to be procure optionally)
- Power Supply
- 230 VAC ± 10%, 50 Hz
- Dimensions:
â— Net Dimension: 36 x 32 x 27 cm (L x W x H)
â— Gross Dimension: 48 x 40 x 36 cm (L x W x H)
- Weight:
â— Net Weight: 7 kg
â— Gross Weight: 10Â kg
Download brochure